If fitting the door to a Land Rover with the middle hinge fitted you will need to drill the middle hinges holes into door skin. The holes are already in the door frame so don't worry you wont need to measure anything or compare it to your old door.
Depending on your handle/ door lock assembly type you might have to drill a hole in the door skin for the lock hole (We can supply a generic paper template if needed, but please compare it to your old door lock hole position). Over the years Land Rover changed the rear door check strap many times so depending on age of your vehicle you may require a different check strap or modification to your current one. The glass in the door is unheated this makes them ideally suited for tinting and gives them a really nice uncluttered look.We have found in practice that the rear heated windows don't really do much other than help trap dirt and grime on the inside with the puny wiper smearing road grease on the outside. We do however always advise that spare wheels should be carried on a separate wheel carrier, as it was a poor design from Land Rover to begin with as no rear doors are ideally upto the weight of the spare wheel. Even the all steel pressed steel gen LR puma doors are now starting to fail from the weight of the spare wheels. So just to clarify this is a generic door and depending on your model it may require modification as listed above to fit your car. If you are in any doubt please call 07901 106767 and we can talk you through this. If you are really stuck and can visit us (Preston, Lancs) I will even try and help fit it too! I have now added these updates to the description in blue to highlight this, but please note the modifications required have always been in the description. (Obviously on panels the final painting, prep and protection are the responsibility of the end user).
These doors are in grey primer wet painted NOT powder coating most paint shops will not wet paint over powder coating! Many people just key the grey primer and paint on top with good results, however many paint shops that offer a guarantee on their work will probably take the door down to bare metal. These doors are wet painted so are much easier to key to or sand than powder coated doors (normally black). I hope this helps and remember if in any doubt please call. We are an official Bearmach supplier so we can supply any other parts you may require for your Land Rover.
Located near Preston & Southport. Viewing is available and preferred. The item won't be released until funds have cleared. No overseas buyers or scammers (overseas exporters will need to find a uk agent willing to pay cash on their behalf).
Low feedback ebayers to contact me first. All images & text are property of Zeb Autos and are not to be used without our prior consent. The item "Bearmach Land Rover Glazed Rear Back Safari Door 90 110 Defender Series II III 3" is in sale since Thursday, November 10, 2016.
This item is in the category "Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Doors & Door Parts". The seller is "zebv8" and is located in Preston. This item can be shipped to United Kingdom.