Land Rover Discovery Series 2 Superpro Bush Kit Watts Link Rear Bushing Spf4400k

The Polyurethane material has been designed to be more resilient, with a high level of resistance to abrasion, to oils and solvents, and with a high tear strength. Fitting your car with a SuperPro bush kit will instantly give your car a'new-car' feeling. The bush kits also include crush tubing, which is an integral component of the suspension bushing system and is necessary for free pivoting. The crush tubes are made to precision tolerances to ensure precise fits are maintained. Where possible, SuperPro uses high-stress, corrosion resistant and hard-anodised "Supaloy".

This new leaner, lighter alloy solution helps lower weight, fuel usage and running costs while improving service life and reliability. Jack your vehicle and place on supports or hoists. Remove all necessary components in order to gain access to the watts link bolts. Support the differential and remove the mounting bolts.

Remove the OE bushes including the shell from the watts link using hydraulic press or other suitable pressing tools. Clean the housing areas to remove any old bushing residue and material before you install the SuperPro bushes.

Apply the grease which comes with this kit to all mating surfaces. Push the new cotton reel into place, push the crush tube into the bush, insert the poly washer over the crush tube. Refit any other components which may have been removed. For the following postcodes please call for a price.

AB30-38, AB44-56, BT, FK17-99, G83, IV1-28, IV30-39, IV52-54, IV63, KW1-14, PA21-33, PA34-40, PH18-26, PH30, PH31-41, PH49-50, HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3 All part numbers are for reference use only. Collection can be arranged if desired or we also offer a fitting service. All indicated data are approximate values and are subject to the usual commercial fluctuations. All information correct at time of publication to the best of our knowledge.